Flight
This section explains how to fly the aircraft, including joystick mode, manual takeoff, and manual landing.
2 min read · English documentationThis section explains how to fly the aircraft, including joystick mode, manual takeoff, and manual landing.
Joystick Mode
In the figure above, item 4 is the left joystick and item 9 is the right joystick.
The remote controller uses Mode 2 by default at the factory. During flight, use the left joystick to control flight altitude and direction, and the right joystick to move the aircraft forward, backward, left, and right.
| Joystick Input | Function |
|---|---|
| Push the left joystick up | Increase the UAV altitude |
| Push the left joystick down | Decrease the UAV altitude |
| Push the left joystick left | Yaw the UAV nose horizontally to the left |
| Push the left joystick right | Yaw the UAV nose horizontally to the right |
| Push the right joystick up | Move the UAV horizontally forward in the nose direction |
| Push the right joystick down | Move the UAV horizontally backward from the nose direction |
| Push the right joystick left | Move the UAV horizontally to the left |
| Push the right joystick right | Move the UAV horizontally to the right |
Manual Takeoff/Landing
- Arm/disarm the motors: Move the left joystick to the lower-right corner and hold it there for 2 seconds. After landing, hold the joystick at its lowest position for 3 seconds; the aircraft will automatically enter idle mode and then disarm.
- Take off: Slowly push the throttle joystick upward (the left joystick in Mode 2) to make the aircraft take off.
- Land: Pull the throttle joystick downward (the left joystick in Mode 2) until the aircraft lands. Hold it at its lowest position for 3 seconds; the aircraft will disarm automatically and the motors will stop.
