Signal Link Description
Signal Link Description documentation for FlyCore i225U.
1 min read · English documentation| Signal Type | Source | Destination | Physical Interface/Protocol | Remarks |
|---|---|---|---|---|
| Remote-control signal | Receiver (a telemetry radio with SBUS can also be used) | Flight controller | SBUS | Note that this is SBUS, not PPM or PWM. Only one signal wire is generally required. An integrated LQ3 video/data transmission link is currently used. |
| Telemetry signal | Video/data transmission module | Flight controller | Flight controller telemetry serial port | This is a typical onboard telemetry link. The correct serial port number and baud rate must be configured in the flight controller parameters. |
| Network signal | Video/data transmission module | Onboard computer | Onboard video transmission Ethernet port | Provides access to the operating status of the SLAM algorithm and to the 3588 onboard computer used for control development. |
| Control signal | Flight controller | ESC | DShot protocol | Standard digital ESC control signal. |
