Disclaimer and Safe Operation Guidance

Pre-flight Checklist

• Check the battery for leakage or damage. After confirming that the battery is in good condition, insert it into the battery compartment and secure it in place.

• Check whether the propellers are loose. Then check whether any screws are loose and whether the propellers can rotate freely. After confirming that there are no problems, unfold the propellers.

• Check whether the remote controller is powered on and check the TX battery level.

• After powering on the UAV, check whether the onboard-computer and flight-controller indicators illuminate normally.

• After connecting to the ground station, check the UAV battery level. Charging is recommended when the voltage drops to 22.0V.

• Check whether the UAV is placed level, and check its attitude indicator, altitude, heading angle, and other information.

• Check the safety mode, low-battery protection, geofence, and return-to-home altitude.

Disclaimer and Warnings

• To protect your lawful rights and interests, please carefully read the product documentation provided with this product, including the wiki, disclaimer, and safety instructions, before using the product. AMOVLAB reserves the right to update the above documents. Be sure to operate this product in accordance with the user manual and safety instructions.

• This product is not suitable for persons under 18 years of age or other persons without full capacity for civil conduct. Please prevent such persons from coming into contact with this product, and exercise particular caution when operating it in their presence.

• This product is intended for scientific research and education. Its source code is open source and supports secondary development. It is not a stable commercial product. Users must have a certain level of foundational knowledge, and its stability is not comparable to that of commercial products. Purchasing this product indicates that you are aware of and understand its special characteristics. Secondary development involves a certain technical threshold and requires users to have development skills and the ability to learn independently.

• Once you begin using this product, you are deemed to have read, understood, acknowledged, and accepted all terms and content of the product's user manual, disclaimer, and safety instructions. Users undertake to be responsible for their own actions and all resulting consequences. Users undertake to use this product only for legitimate purposes and agree to these terms and any related policies or guidelines that AMOVLAB may establish.

• When using this product, you must strictly comply with and implement all requirements, including but not limited to those in the user manual and safety instructions. Users shall bear all related liability and losses arising from personal injury, accidents, property loss, legal disputes, or any other adverse events involving conflicts of interest caused by use that violates the safety instructions or by force majeure. AMOVLAB assumes no liability.

• AMOVLAB assumes no liability for any direct or indirect violation of laws or regulations resulting from a user's use of this product.

• Before using this product, carefully read the instructions in this document. Once you begin using this product, you indicate your acknowledgment and acceptance of all content herein. Strictly follow the installation and operating instructions in this document. AMOVLAB assumes no legal liability for any consequences or losses caused by improper use, installation, unauthorized modification, or other acts by the user.

Legal Requirements and Flight Restrictions

No-Fly Areas

Airspace protection zones extending 10 kilometers on each side of the runway centerline and 20 kilometers beyond each runway end at civil airports, and 15 kilometers on each side of the runway centerline and 20 kilometers beyond each runway end at military airports;

Military-controlled areas, prisons, power plants, and areas within 100 meters of them;

Railways, expressways, ultra-high-voltage transmission lines, and areas within 50 meters on each side of them;

Key protected target areas, including large-scale military industry, communications, hazardous chemical production and storage, and material reserves;

Temporary control areas announced by provincial and municipal (prefecture) people's governments.

Major Laws and Regulations Governing UAVs

Administrative Provisions on Real-Name Registration of Civil Unmanned Aircraft: UAVs weighing 250g or more must be registered.

Announcement on the Protection Scope of Obstacle Limitation Surfaces at Civil Airports: No-fly zones have been designated around 155 airports nationwide.

Guidelines for Establishing a Standards System for Unmanned Aircraft Systems: Proposes a standards-system framework for unmanned aircraft systems.

UAV Geofencing and Data Specification for UAV Cloud System Interfaces: China was the first country in the world to issue industry standards of this kind.

Interim Regulations on Flight Management of Unmanned Aircraft (Draft for Comments): Introduces specific penalties for unauthorized flights for the first time.

Flight Requirements

Product Use Instructions

• Before powering on the product, be sure that the antenna is fully installed to prevent damage to the module when power is applied.

• Never reverse the power-supply polarity, as this may burn out the equipment.

• Keep the module dry and away from water.

• Store the module carefully. Do not throw, strike, or drop it.

• Beginners should fly outdoors in Position mode, which requires a GPS satellite count of at least 15.

• Be sure to remove the propellers when debugging the aircraft or calibrating the sensors (ESC).

• When the aircraft is powered on, the sensors will initialize. Do not move the aircraft.

Flight Safety Instructions

• This product is not suitable for persons under 18 years of age or other persons without full capacity for civil conduct.

• This product has a relatively large airframe, high-speed rotating propellers, and powerful propulsion, and therefore poses certain hazards during operation. Failure to operate and use this product as required may result in danger and injury.

• When using this product, stay away from hazardous environments such as airports, railways, expressways, high-rise buildings, and power lines.

• When using this product, stay away from environments with strong electromagnetic interference, such as cellular base stations and high-power transmitting equipment.

• When using this product, stay away from all types of manned aircraft.

• When using this product, operate it with a safety tether attached to prevent safety incidents.

• Do not use this product in adverse conditions such as rain, thunderstorms, blowing dust, fog, snow, strong winds, or low temperatures.

• When flying above an altitude of 3000 meters, environmental factors will reduce flight performance. Use this product with caution.

• This product is not waterproof. Do not attempt to land it on water.

• When operating this product at low altitude, always maintain a safe distance of at least 10 meters between the UAV and people or animals.

• When using this product in populated areas, always keep the UAV within the operator's visual line of sight.

• Do not hover or fly this product over crowds, and do not use it to frighten others for amusement.

• If onlookers approach, operate carefully and land as soon as possible to leave the area and prevent accidents.

• Do not operate this product near areas where children are playing.

• Do not use this product to chase vehicles or interfere with the normal operation of vehicles.

• Unless absolutely necessary, do not shut down the motors while this product is flying.

• Do not use this product after consuming alcohol, when fatigued, while taking medication, or when feeling unwell.

• Inspect this product before each use, including but not limited to the security of its components, cracks and wear on the airframe and propellers, battery level, and the functionality of the indicator lights. If any abnormality is found, stop using the product immediately and replace the affected component.

• A UAV in an abnormal operating state may cause an accident. Never start the propellers or force it to fly.

• Do not attempt to obstruct any moving part of this product while it is operating.

• Do not modify this product or use it for any purpose other than its originally intended use.

• This product does not include a payload-carrying function. Do not use it for transportation.

• Use original factory accessories for maintenance and replacement.

• When lending this product to another person, ensure that the operator understands and complies with these safety instructions.