Disclaimer and safe operation guide

This section mainly describes the disclaimer and safe operation guidelines for the P450 aircraft.

Preflight checklist

• Check the battery for leakage or damage. After confirming that the battery is in good condition, insert it into the battery compartment and secure it.
• Check whether the propellers are loose, whether any screws are loose, and whether the propellers can rotate freely. After confirming that there are no issues, unfold the propellers.
• Check whether the remote controller is powered on and check the TX battery level.
• After powering on the UAV, check whether the lights under the motors illuminate normally.
• After connecting to the ground control station, check the UAV battery level and the consistency of all cells. If the voltage of any single cell approaches or falls below 3.7 V, stop flying and charge the battery promptly.
• Check whether the UAV is placed level, and check its attitude indicator, altitude, heading angle, and other information.
• Check the safety settings, including low-battery protection, the geofence, and the return-to-home altitude.

Disclaimer and warning

• To protect your lawful rights and interests, carefully read the product documentation provided with this product, including the Wiki, disclaimer, and safety instructions, before use. AMOVLAB reserves the right to update these documents. You must operate this product in accordance with the user manual and safety instructions.
• This product is not suitable for persons under 18 years of age or others who do not have full capacity for civil conduct. Keep this product away from such persons, and exercise particular caution when operating it where they are present.
• This product is intended for scientific research and education. Its source code is open-source and supports secondary development. It is not a stable commercial product. Users must have a certain level of foundational knowledge, and its stability is not comparable to that of commercial products. Purchasing the product indicates that you are aware of and understand its special characteristics. Secondary development has a certain barrier to entry and requires users to have development skills and the ability to learn independently.
• Once you begin using this product, you are deemed to have read, understood, acknowledged, and accepted all terms and content of its user manual, disclaimer, and safety instructions. You undertake to be responsible for your actions and all resulting consequences. You undertake to use this product only for legitimate purposes and agree to these terms and any relevant policies or guidelines that AMOVLAB may establish.
• When using this product, you must strictly observe and implement all requirements, including but not limited to those in the user manual and safety instructions. The user bears all related liability and losses arising from any personal injury, accident, property loss, legal dispute, or other adverse event involving conflicts of interest caused by conduct contrary to the safety instructions or by force majeure. AMOVLAB assumes no liability.
• AMOVLAB assumes no liability for any act that directly or indirectly violates laws or regulations while the user is using this product.
• Carefully read these instructions before using this product. Once you begin using this product, you indicate your acknowledgment and acceptance of all content herein. Strictly follow the installation and operating instructions in this document. AMOVLAB assumes no legal liability for any consequences or losses caused by improper use, installation, unauthorized modification, or other actions by the user.

Legal requirements and flight restrictions

• Prohibited flight areas

  • Airspace protection areas within 10 km on either side of the runway centerline and 20 km beyond each runway end at civil airports, and within 15 km on either side of the runway centerline and 20 km beyond each runway end at military airports;
  • Military management zones, prisons, power plants, and areas within 100 m of them;
  • Railways, expressways, extra-high-voltage transmission lines, and areas within 50 m on either side of them;
  • Key prevention and control target areas, such as major military industry, communications, hazardous chemical production and storage, and material reserve facilities;
  • Temporary control areas announced by provincial and municipal (prefecture) people's governments.

• Primary UAV laws and regulations

  • Administrative Provisions on Real-Name Registration of Civil Unmanned Aircraft: UAVs weighing 250 g or more must be registered.
  • Announcement on Publishing the Scope of Obstacle Limitation Surface Protection Areas for Civil Airports: No-fly zones have been designated for 155 airports nationwide.
  • Guidelines for Building a Standards System for Unmanned Aircraft Systems: Proposes a framework for a standards system for unmanned aircraft systems.
  • UAV Geofencing and Data Interface Specifications for UAV Cloud Systems: China was the first country in the world to issue industry standards of this kind.
  • Interim Regulations on Flight Management of Unmanned Aircraft (Draft for Comments): Introduces specific penalties for noncompliant flights for the first time.

Product use instructions

• Before powering on the product, ensure that all antennas are fully installed to prevent damage to modules when power is applied.

• Never reverse the power-supply polarity, as this may burn out the equipment.

• Keep the modules dry and away from water.

• Store the modules carefully. Do not drop or strike them, and protect them from falls.

• New users must complete position-control flight practice indoors in a LiDAR-based localization environment. Before takeoff, confirm that the positioning source in the ground control station is Valid and that the position data is near (0,0,0).

• When commissioning the aircraft or calibrating sensors (ESC calibration), always remove the propellers.

• When the aircraft is powered on, its sensors initialize. Do not move the aircraft.

Flight safety instructions

• This product is not suitable for persons under 18 years of age or others who do not have full capacity for civil conduct.
• This product has a relatively large airframe, high-speed rotating propellers, and powerful flight performance, presenting certain hazards during operation. Failure to operate and use this product as required may result in danger and injury.
• When using this product, stay away from hazardous environments such as airports, railways, expressways, high-rise buildings, and power lines.
• When using this product, stay away from environments with strong electromagnetic interference, such as cellular base stations and high-power transmitting equipment.
• When using this product, stay away from all types of manned aircraft.
• When using this product, attach a safety tether during operation to prevent safety incidents.
• Do not use this product in harsh conditions such as rain, thunderstorms, blowing sand or dust, fog, snow, strong winds, or low temperatures.
• When flying above an altitude of 3000 m, environmental factors will reduce flight performance. Use this product with caution.
• This product is not waterproof. Do not attempt to land it on water.
• When operating this product at low altitude, always maintain a safe distance of at least 10 m between the UAV and any person or animal.
• When using this product outside sparsely populated areas, always keep the UAV within the operator's visual line of sight.
• Do not hover this product over or fly it above crowds, and do not use it to frighten others for amusement.
• When onlookers approach, operate the product carefully and land as soon as possible to leave the area and prevent accidents.
• Do not operate this product near areas where children are playing.
• Do not use this product to pursue vehicles or interfere with their normal operation.
• Do not shut down the motors while this product is in flight unless absolutely necessary.
• Do not use this product after consuming alcohol, while fatigued, after taking medication, when feeling unwell, or under similar conditions.
• Inspect this product before every use, including but not limited to the security of its components, cracks and wear on the airframe and propellers, battery level, and proper operation of the indicator lights. If any abnormality is found, stop using the product immediately and replace the affected component.
• A UAV in an abnormal operating condition may cause an accident. Never start the propellers or attempt to fly despite the abnormality.
• Do not attempt to stop any moving part of this product while it is operating.
• Do not modify this product or use it for purposes other than those for which it was originally designed.
• This product does not include a load-carrying function. Do not use it for transportation.
• Use original manufacturer parts for maintenance and replacement.
• When lending this product to another person for operation, ensure that the operator understands and follows these safety instructions.

After-sales information

• These terms apply only to products manufactured by AMOVLAB. They also apply to products sold by AMOVLAB through its authorized distributors.

• Our product warranty period is 12 months from the date on which the product passes preliminary acceptance after delivery. We are responsible for repairing failures not attributable to Party A. (Consumables are not covered by the warranty.) For problems caused by software modifications made while Party A is using the product, we may provide guidance via WeChat voice/video calls depending on the difficulty of resolving the problem.

• If our company verifies a quality issue within one week from the date of purchase, AMOVLAB will bear the round-trip courier costs for the product returned for repair. If our company verifies a quality issue more than one week but within one year from the date of purchase of an AMOVLAB product, the user and our company will each bear the courier cost for sending the returned product in one direction.

• Proof of purchase and a warranty card or transaction record must be provided when returning a product for repair.

• If a quality issue occurs under normal use within seven days from the date of purchase and there is no visible damage, the customer may negotiate a free replacement with a product of the same model through an official AMOVLAB sales channel or dealer by presenting the warranty card or proof of purchase. Upon receiving the product for replacement, the dealer must immediately notify our company so that the replacement can be recorded.

• For products that have been damaged by the user, modified, or disassembled since purchase, or that are beyond the one-year free warranty period, the user must pay the round-trip shipping costs and repair costs. Charging standard: labor cost + parts cost

• To protect your rights and interests and enable us to provide timely and effective service, fully complete the warranty card and request proof of purchase when purchasing an AMOVLAB product.

• Visit www.amovlab.top for the complete after-sales service terms.