Unpacking Guide
To help users get started and become familiar with the product, we provide this unboxing guide. After receiving the shipped product, assemble it by following these steps:
1 min read · English documentationUnboxing Guide
To help users get started and become familiar with the product, we provide this unboxing guide. After receiving the shipped product, assemble it by following these steps:
- Open the package and check that it contains the LQ-10 product certificate.
- Open the upper insert in the package and check for the following accessories: adapter Ethernet cables ×2, Ethernet adapters ×2, USB data cable, cable pack ×1, antennas ×2, Ethernet cables ×2, product manual, and screw pack.
The cable pack contains the following cables:
| No. | Connector Type | Cable Type | Number of Pins | Purpose |
|---|---|---|---|---|
| ① | GH1.25 | Serial cable | 3pin | Connects to a GH1.25-to-Dupont adapter for user DIY projects |
| ② | GH1.25 to XT30 | Power cable | 2pin→XT30 | Connects to the user's battery |
| ③ | Dual GH1.25 | Ethernet-to-Ethernet cable | 4pin→4pin | Connects the LQ Ethernet port to the Ethernet adapter |
| ④ | GH1.25 | Serial cable | 3pin→3pin | Serial-port pins |
| ⑤ | GH1.25 power cable | Power cable | 2pin | Can be used for DC power input |
Connect an antenna to each LQ-10 antenna connector and tighten the antennas.
Precautions
Whenever possible, keep the power off and do not energize the unit while installing or removing antennas, as doing so could affect the RF performance of the LQ-10.
