Remote Computer Transmission Use Case

Remote Computer Transmission Use Case

This section introduces the remote computer transmission function of LQ-10 series products and provides a typical use case. This is an application of the network data transmission function provided by LQ-10 series products.

Procedure

• Configure the primary and secondary LQ-10 devices, and use the supplied Ethernet cables to connect their Ethernet ports to the respective computers.

• Create a shared folder between the two computers and transfer files from computer A to computer B through that shared folder. Refer to the following link for configuration instructions: https://blog.csdn.net/qq_36607894/article/details/100534393

The LQ-10's high wireless bandwidth enables fast file and data transfer between computers.

Remote Computer Control Use Case

An LQ-10 module can be used to control a computer remotely. The following example uses an AMOVLAB onboard computer:

• Following the method above, connect one end of an Ethernet cable to the primary LQ-10 device and the other end to the AMOVLAB onboard computer.
• Connect the secondary LQ-10 device to the PC's Ethernet port, and then refer to the following link to establish wireless communication with and control of the onboard computer. The key is connectivity between the Ethernet ports, which can transfer data directly between them: https://docs.amovlab.com/allspark2-x86/#/src/%E6%8E%A5%E5%8F%A3%E8%BD%AF%E4%BB%B6Demo%E6%B5%8B%E8%AF%95%E7%A4%BA%E4%BE%8B/%E6%8B%93%E5%B1%95%E6%B5%8B%E8%AF%95%E9%A1%B9%E7%9B%AE