Documentation/LQ-10 Video/Data Transmission Module WikiEnglish · V1
Browse documentation
Before You Start

Download Center

This page provides the latest LQ 10 firmware in a timely manner, together with the drivers and tools mentioned in the documentation.

2 min read · English documentation

Download Center

This page provides the latest LQ-10 firmware in a timely manner, together with the drivers and tools mentioned in the documentation.

Firmware Downloads

We recommend downloading the latest firmware version first. If the current device is running V1.0.0, first use the bridge update package to upgrade to V1.1.0, and then use the latest standard update package to upgrade to V1.2.0.

Version Standard Update Package Bridge Update Package Applicability Release Date
V1.2.0 upgrade_lq10_v1.2.0.tar.gz bridge_upgrade_lq10_v1.1.0.tar.gz Latest firmware. V1.1.0 can be upgraded directly with the standard update package. V1.0.0 must first be upgraded to V1.1.0 with the bridge update package, and then upgraded to the latest version with the V1.2.0 standard update package. 2026.07.07
V1.1.0 upgrade_lq10_v1.1.0.tar.gz bridge_upgrade_lq10_v1.1.0.tar.gz V1.1.0 firmware. V1.0.0 devices must use the bridge update package to upgrade to this version. V1.1.0 and later versions use the standard update package for upgrades. 2026.06.02
V1.0.0 upgrade_lq10_v1.0.0.tar.gz - Initial V1.0.0 firmware. 2026.03.08

Upgrade Paths

Current Version How to Upgrade to the Latest Version
V1.0.0 First use bridge_upgrade_lq10_v1.1.0.tar.gz to upgrade to V1.1.0, and then use upgrade_lq10_v1.2.0.tar.gz to upgrade to the latest version.
V1.1.0 Use upgrade_lq10_v1.2.0.tar.gz directly to upgrade to the latest version.
V1.2.0 This is already the latest version; no upgrade is required.

Update Package Descriptions

bridge_upgrade_lq10_v1.1.0.tar.gz

  • This is a bridge update package.
  • It is used only to upgrade V1.0.0 to V1.1.0.
  • This update package only needs to be used once.
  • After the upgrade is complete, do not use this bridge package for subsequent upgrades.
  • You cannot roll back to an earlier version after the upgrade.
  • Do not disconnect power during the upgrade.

upgrade_lq10_v1.1.0.tar.gz

  • This is the V1.1.0 standard update package.
  • It is used for firmware upgrades on V1.1.0 and later versions.
  • Atomic updates are supported starting with this version.
  • Atomic updates reduce the risk of a device becoming unusable if power is unexpectedly interrupted during an upgrade.

upgrade_lq10_v1.2.0.tar.gz

  • This is the V1.2.0 standard update package.
  • Prerequisite: the current device version must be V1.1.0.
  • Supports applying serial-port configurations dynamically at runtime.
  • Supports applying network configurations dynamically at runtime.
  • Supports broadband modes: 20MHz, 40MHz, and 80MHz.
  • The 20MHz broadband mode can improve long-range transmission stability.
  • Optimized the online information interface.
  • Changed the SBUS configuration method.
  • AT and the web interface now use the same standard SBUS configuration:
AT+UARTCFG=0,sbus,100000,8,2,e,n

Software Downloads

Software Download Link
Wildfire Serial Port Assistant fireTools.zip
VMS Streaming Software VMS.zip

Mechanical Structure Download

Name Download Link
LQ-10 Enclosure Structure File LQ-10-Enclosure-Structure.stp