Documentation/LQ-10 Video/Data Transmission Module WikiEnglish · V1
Browse documentation
Support and Services

Common Troubleshooting

Solutions: 1. Refresh the web page to update it. In Microsoft Edge, for example, press F5 to refresh. 2. Clear the browser cache and reopen the LQ 10 web page. First open the br…

2 min read · English documentation

Common Troubleshooting

The Web Page Does Not Match the Normal LQ-10 Web Interface

The web page may differ from the normal LQ-10 interface for the following reason:

  • Abnormal web-page display: Users who encounter this issue were most likely LQ-3 users previously. The browser cached the older LQ-3 web page, causing the abnormal display.

image.png

Solutions:

  1. Refresh the web page to update it. In Microsoft Edge, for example, press F5 to refresh.
  2. Clear the browser cache and reopen the LQ-10 web page.
  • First open the browser settings.

image.png

  • Next, open the privacy settings and select the data to clear.

image.png

image.png

  • Finally, clear the cache and reopen the LQ-10 web page. The display should return to normal.

image.png

Connection Lost After Switching Between Broadband and Narrowband

Users may be unable to connect after switching between broadband and narrowband modes. This occurs when the bandwidth modes at the two ends do not match.

Solution: Check whether both the LQ-10 AP and STA are in broadband mode or both are in narrowband mode. The two devices must use the same bandwidth mode to communicate normally.

Communication Failure in Multicast Mode

Communication may fail when multicast mode is used because the multicast IP address is configured incorrectly. Refer to the following article: https://blog.csdn.net/weixin_46121540/article/details/136019966

Abnormal Login Page

When logging in, users may reach an abnormal web page similar to this one:

image.png

This usually means that the router gateway on the current network conflicts with the LQ-10 network IP address. Resolve it as follows:

  1. Append /index.html to the IP address. For example: http://192.168.1.2/index.html

  2. After opening the web page, click “Network and Wireless” on the left to open the web configuration page, and change the IP address to a different one.

image.png

Port Issues

The following ports are reserved by the system and cannot be configured: 9527, 45454, 52112, and 20000–20048.

https://blog.csdn.net/mopmgerg54mo/article/details/151114114