Documentation/Allspark2-Orin NX WikiEnglish · NX
Browse documentation
Additional documentation

进入恢复模式

1. Turn off power to the system.

1 min read · English documentation

Entering Recovery Mode

  1. Turn off power to the system.

  2. Use a USB cable to connect the Nano OTG-USB port to a USB port on the Ubuntu development host.

  3. Press and hold the REC button, power on the system, keep holding the button for at least 3 seconds, and then release the REC button.

  4. Enter lsusb in the host terminal. If an NVIDIA device is displayed, the device has successfully entered Recovery mode and subsequent operations such as flashing and backup can be performed. If no NVIDIA device is displayed, check the cable and the procedure for entering the mode, and then try again.