Unboxing Guide
1. Open the package and check whether it contains an LQ product certificate of conformity.
2 min read · English documentationUnboxing Guide
LQ is available in two unit types: the LQ3 Data Link Station Unit and the LQ3 Data Link Mobile Unit. They are assembled differently. The Station Unit has a built-in 3.7V lithium battery, requires no external power supply, and provides a Type-C charging port. It is easy to carry and suitable for users who require greater flexibility. The Mobile Unit has no built-in power supply and requires an external 12~18V power input. Its compact size makes it suitable for users with strict weight requirements.
LQ3 Data Link Mobile Unit Unboxing Guide
Upon receiving the product, assemble it as follows:
- Open the package and check whether it contains an LQ product certificate of conformity.
- Remove the upper insert from the package and check for the following accessories: Ethernet adapter cables x2, Ethernet port adapters x2, cable kit x1, and antennas x2.
The cable kit contains the following cables:
| No. | Connector Type | Cable Type | Pin Count | Description |
|---|---|---|---|---|
| ① | GH1.25 | Power cable | 2pin | Connects to the Mobile Unit power port |
| ② | Dual GH1.25 | Serial port-to-flight controller cable | 4pin→6pin | Connect the 4pin end to the LQ serial port and the 6pin end to the TELEM port on the 6C flight controller |
| ③ | Dual GH1.25 | Ethernet port-to-Ethernet port cable | 4pin→4pin | Connects to the LQ Ethernet port and Ethernet port adapter, respectively |
| ④ | GH1.25 | Serial cable | 4pin | Connects to exposed GH1.25 wire leads for user DIY |
| ⑤ | GH1.25-to-XT30 | Power lead | 2pin→XT30 | Connects to the user's battery |
Connect the antennas to the LQ antenna ports and tighten them.
LQ3 Data Link Station Unit Unboxing Guide
Upon receiving the product, assemble it as follows:
- Open the package and check whether it contains an LQ product certificate of conformity.
- Remove the upper insert from the package and check for the following accessories: RJ45 Ethernet cables x2, antennas x2, Type-C data cable x1, and serial cables x3.
- Connect the antennas to the LQ antenna ports and tighten them.
Precautions
Avoid installing or removing the antennas while the LQ is powered on, as doing so may affect its RF performance.
