Network Camera Use Case
Our F410 UAV is equipped with a Xiongmai network camera. The camera's output is connected to the Ethernet port on the LQ 3 unit and transmitted wirelessly to the LQ3 Data Link S…
1 min read · English documentationNetwork Camera Use Case
Our F410 UAV is equipped with a Xiongmai network camera. The camera's output is connected to the Ethernet port on the LQ-3 unit and transmitted wirelessly to the LQ3 Data Link Station Unit. The video stream can then be viewed using Xiongmai's official VMS software. Standard network cameras can also transmit video in this way.
The figures above show the completed wiring. Next, connect the LQ3 Data Link Station Unit to a laptop to begin transmitting video.
- Open the VMS software, select the manual addition option, and enter the camera IP address
192.168.1.10.
- Select the checkbox and wait for the connection to be established.
- Return to the home page and click Monitor to view the video.
